TS 400 "TURTLE" glass trolley with Nemo Grabo Pro vacuum suction system with up to 400 kg load capacity
€628.43*
Available, delivery time: 1-3 days
- Small, light and robust helper when transporting glass panes
- faster and far more cost-effective handling of heavy and bulky items such as tables, doors, panels, etc.
- deep center of gravity for moving large plates
- four swivel castors, each of which can be individually aligned and thus ensure high maneuverability
- By securing the transported goods with the vacuum handheld vacuum cleaner, transport is particularly safe
Product information "TS 400 "TURTLE" glass trolley with Nemo Grabo Pro vacuum suction system with up to 400 kg load capacity"
- deep center of gravity for moving large plates
- four swivel castors, each of which can be individually aligned and thus ensure high maneuverability
- By securing the transported goods with the vacuum handheld vacuum cleaner, transport is particularly safe
- high resilience
- soil-friendly
- extremely abrasion resistant
- excellent driving and operating comfort
|
Max. load capacity |
400 kg |
|
Tare weight |
7 kg |
|
Material |
Steel, yellow chromated and equipped with protective varnish |
|
Operation |
Single operator |
|
Length x width x height |
500 x 460 x 800 mm |
|
Usable width |
155 mm |
|
Wheel diameter |
100 mm, Elastic tires |
|
Ground clearance of the pane |
30 mm |
|
Suction cup |
Nemo Grabo Pro |
|
Suction system adjustable up to |
800 mm |
|
Included |
Holding rod + Nemo Grabo Pro cordless vacuum suction lifter |
Login
weitere Infos zum Nemo GRABO PRO-LIFTER 20
GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once activated, the pressure pump creates strong suction and adheres firmly to any non-porous, flat surface. The suction is strong enough to hold loads of up to 375 lbs. To lift a slab of flat, solid material, simply turn on the device and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost, the pump will automatically turn on until vacuum pressure is restored. The handle is also equipped with a digital display that shows the maximum weight the GRABO Pro can safely lift at that moment. Weight is displayed in both pounds and kilograms. The Pro-Lifter is equipped with an intelligent digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated. The sensor automatically ensures an optimal suction level so that objects remain completely under control when lifting or even while moving. The digital display on the handle shows the applied pressure in both bar and psi. With the pressure sensors, you don't have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is particularly useful when lifting and moving coarse materials. The sensors digitally detect the required pressure and maintain it while the object being lifted is transported. This ensures precise handling and installation without too much effort. In any case, the sensor automatically stops the pump when the maximum vacuum capacity of 11.6 PSI is reached. However, if you want to lift and move objects that have lighter mass, then the vacuum pump can be turned off. When you want to remove the tool from the object you simply push the red vacuum release button. The tool operates on 14.8 volts 2600 mAh Li-ion removable battery. The battery takes two hours for a full charge. On a full charge, this powerful battery can last for 900 cycles or 1.5 hours on non-stop running. The battery lasts for a whopping 30 days on standby mode. Just like the Classic model, GRABO PRO is also equipped with four lifting lugs placed on both sides of the grab handle. These lugs become handy in case the tool is to be used with additional grips or straps for support. The GRABO Pro has been rigorously tested by professionals around the world. Given its compact design and competitive performance, the Pro Lifter is rapidly becoming a tool of choice, especially in the construction industry around the world.NOTE: Due to the high pressure created with GRABO, we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm. Glass thinner than 6mm may be damaged.