Nemo GRABO PRO-LIFTER 20 cordless vacuum suction lifter in Hardshell Case

Our latest innovation, the TS 400 glass transport trolley with a load capacity of up to 400 kg, nicknamed "Turtle", enables heavy and bulky items to be transported quickly and easily. Instead of heavy lifting and carrying, simply place the goods to be transported on the transport trolley. This glass transport cart makes the job easier. One person can do the work of two people. This means faster and far more cost-effective handling of heavy and bulky items, tables, doors, pipes, panels, etc.Particularities: deep center of gravity for moving large platesfour swivel castors, each of which can be individually aligned and thus ensure high maneuverability By securing the transported goods with the vacuum handheld vacuum cleaner, transport is particularly safeEquipped with elastic tireshigh resilience soil-friendly extremely abrasion resistant excellent driving and operating comfortProduct information "Nemo Grabo Pro cordless vacuum suction lifter" GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once activated, the pressure pump creates strong suction and adheres firmly to any non-porous, flat surface. The suction is strong enough to hold loads of up to 375 lbs. To lift a slab of flat, solid material, simply turn on the device and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost, the pump will automatically turn on until vacuum pressure is restored. The handle is also equipped with a digital display that shows the maximum weight the GRABO Pro can safely lift at that moment. Weight is displayed in both pounds and kilograms. The Pro-Lifter is equipped with an intelligent digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated. The sensor automatically ensures an optimal suction level so that objects remain completely under control when lifting or even while moving. The digital display on the handle shows the applied pressure in both bar and psi. With the pressure sensors, you don't have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is particularly useful when lifting and moving coarse materials. The sensors digitally detect the required pressure and maintain it while the object being lifted is transported. This ensures precise handling and installation without too much effort. In any case, the sensor automatically stops the pump when the maximum vacuum capacity of 11.6 PSI is reached. NOTE: Due to the high pressure created with GRABO, we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm. Glass thinner than 6mm may be damaged.

The new developed TS 250 Air Tandem glass trolley with Nemo Grabo Pro vacuum hand suction system with up to 250 kg load capacity and with 255 mm working width, equipped with pneumatic tandem tyres, was specially developed for use on rough terrain of construction sites.  This trolley with tandem tyres was specially developed for use on rough terrain of construction sites. Transport is specially secure due to fixation of the transport goods by means of the vacuum hand suction system  Due to a safe 4-point-base, the trolley guarantees a very stable position and shock-absorbing transport on uneven surfaces of the construction site. Advantages: • Light and robust assistant for the transport of glass panes • Easy putting down due to tandem tyres • Lasered steel profile yellow chromated and equipped with protective varnish • including robust anti-slip support and integrated carrying handle • Pneumatic tyres for easily surmounting thresholds and driving on uneven terrain of construction sites • like an additional helper at the place of work  Equipped with pneumatic tyres: • good shock-absorption • easily surmounting thresholds and driving on uneven terrain of construction sites • low rolling friction • protective of soil • excellent driving comfort and ease of use  Product information "Nemo Grabo Pro cordless vacuum suction lifter" GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once activated, the pressure pump creates strong suction and adheres firmly to any non-porous, flat surface. The suction is strong enough to hold loads of up to 375 lbs. To lift a slab of flat, solid material, simply turn on the device and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost, the pump will automatically turn on until vacuum pressure is restored. The handle is also equipped with a digital display that shows the maximum weight the GRABO Pro can safely lift at that moment. Weight is displayed in both pounds and kilograms. The Pro-Lifter is equipped with an intelligent digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated. The sensor automatically ensures an optimal suction level so that objects remain completely under control when lifting or even while moving. The digital display on the handle shows the applied pressure in both bar and psi. With the pressure sensors, you don't have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is particularly useful when lifting and moving coarse materials. The sensors digitally detect the required pressure and maintain it while the object being lifted is transported. This ensures precise handling and installation without too much effort. In any case, the sensor automatically stops the pump when the maximum vacuum capacity of 11.6 PSI is reached. NOTE: Due to the high pressure created with GRABO, we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm. Glass thinner than 6mm may be damaged.

The TSP 400 Tandem glass trolley with Nemo Grabo Pro vacuum suction system with up to 400 kg load capacity and with 255 mm working width, equipped with puncture-proof tandem tires, was specially developed for use on rough terrain of construction sites.    Due to a safe 4-point-base, the trolley guarantees a very stable position and shock-absorbing transport on uneven surfaces of the construction site.  Transport is specially secure due to fixation of the transport goods by means of the vacuum hand suction system.  Equipped with puncture-proof wheelsare used in a wide variety of areas where pneumatic wheels can quickly be damaged by the penetration of foreign objects such as nails, chips or broken glass thorn-proof and flat-free, so there is no infamous "flat" springy comfort on uneven floors offer a ride comfort that comes close to that of an pneumatic wheelare made of foamed polyurethane maintenance free significantly lighter than a solid rubber wheel not chalkyAdvantages: • Light and robust assistant for the transport of glass panes • Easy putting down due to tandem tyres • Lasered steel profile yellow chromated and equipped with protective varnish • including robust anti-slip support and integrated carrying handle • like an additional helper at the place of work Product information "Nemo Grabo Pro cordless vacuum suction lifter" GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once activated, the pressure pump creates strong suction and adheres firmly to any non-porous, flat surface. The suction is strong enough to hold loads of up to 375 lbs. To lift a slab of flat, solid material, simply turn on the device and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost, the pump will automatically turn on until vacuum pressure is restored. The handle is also equipped with a digital display that shows the maximum weight the GRABO Pro can safely lift at that moment. Weight is displayed in both pounds and kilograms. The Pro-Lifter is equipped with an intelligent digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated. The sensor automatically ensures an optimal suction level so that objects remain completely under control when lifting or even while moving. The digital display on the handle shows the applied pressure in both bar and psi. With the pressure sensors, you don't have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is particularly useful when lifting and moving coarse materials. The sensors digitally detect the required pressure and maintain it while the object being lifted is transported. This ensures precise handling and installation without too much effort. In any case, the sensor automatically stops the pump when the maximum vacuum capacity of 11.6 PSI is reached. NOTE: Due to the high pressure created with GRABO, we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm. Glass thinner than 6mm may be damaged

This trolley with tandem tyres was specially developed for use on rough terrain of construction sites.  Transport is specially secure due to fixation of the transport goods by means of the vacuum hand suction system. The TS 500 Air Tandem glass trolley with Nemo Grabo Pro vacuum hand suction system with up to 500 kg load capacity and with 255 mm working width, equipped with pneumatic tandem tyres, was specially developed for use on rough terrain of construction sites.    Due to a safe 4-point-base, the trolley guarantees a very stable position and shock-absorbing transport on uneven surfaces of the construction site.   Advantages: • Light and robust assistant for the transport of glass panes • Easy putting down due to tandem tyres • Lasered steel profile yellow chromated and equipped with protective varnish • including robust anti-slip support and integrated carrying handle • Pneumatic tyres for easily surmounting thresholds and driving on uneven terrain of construction sites • like an additional helper at the place of work  Equipped with pneumatic tyres: • good shock-absorption • easily surmounting thresholds and driving on uneven terrain of construction sites • low rolling friction • protective of soil • excellent driving comfort and ease of use Product information "Nemo Grabo Pro cordless vacuum suction lifter" GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once activated, the pressure pump creates strong suction and adheres firmly to any non-porous, flat surface. The suction is strong enough to hold loads of up to 375 lbs. To lift a slab of flat, solid material, simply turn on the device and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost, the pump will automatically turn on until vacuum pressure is restored. The handle is also equipped with a digital display that shows the maximum weight the GRABO Pro can safely lift at that moment. Weight is displayed in both pounds and kilograms. The Pro-Lifter is equipped with an intelligent digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated. The sensor automatically ensures an optimal suction level so that objects remain completely under control when lifting or even while moving. The digital display on the handle shows the applied pressure in both bar and psi. With the pressure sensors, you don't have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is particularly useful when lifting and moving coarse materials. The sensors digitally detect the required pressure and maintain it while the object being lifted is transported. This ensures precise handling and installation without too much effort. In any case, the sensor automatically stops the pump when the maximum vacuum capacity of 11.6 PSI is reached. NOTE: Due to the high pressure created with GRABO, we strongly recommend that you do not attempt to attach GRABO to glass thinner than 6mm. Glass thinner than 6mm may be damaged.